How to use

• Place the mason jar lid on top of the jar (not suitable for one-piece caps with rings)

• Press the sealer firmly, holding it smooth

• Remove the top mason jar sealer to double the effect by adding a ring lid (ring cover not included in our package)

• To get the standard mouth seal bottle, simply insert the red arrow into the standard mouth seal converter

• Align it with the unlock symbol on the main unit and insert it inside the silicone ring in the wide mouth seal area and squeeze it clockwise

• At this point the arrow is aligned with the symbol of the lock, which indicates a successful installation.

Aviso prévio

1. When filling the soft food or liquid, do not overload the bottle, less air in the bottle, the longer the sealer will work and the sealing effect will be short.

2. Please check if the bottle mouth is dry and clean. If there is water or debris in the mouth of the bottle, the mason jar sealer will not be able to seal.

3. The mason jar vacuum sealer did not press in place and did not allow the bottle mouth to enter the sealer completely.

4. Mason jars don't match the lids.

5. Note that frequent use can cause the silicone ring inside the mason's bottle vacuum sealer to shift, resulting in seal failure, manually adjust to the original position before use.

6. Check if the electric vacuum gauge is centered and pressed firmly against the bottle cap, click the button to start the vacuum pump, and wait about 40 seconds or more, and the air can be evacuated to the seal. Clicking on the button closes the sealer again.